Open the top cover and remove the toner cartridge. Flip up the
metal plate with the green handle circled below.
Remove the two screws circled below and remove the
metal plate.
The right side of the transfer roller is held in place
by a black plastic hinged clip. Carefully notice how it is snapped in place so you
remember how to replace it. Pry it off towards you with your finger.
Below is a picture of the transfer roller with the clip removed.
Use the small blue plastic transfer roller removal
tool that came with your printer or use your fingers to lift up the
left side of the transfer roller. Then remove the right side of
the roller from its mount.
When installing the new transfer roller, be careful that the black gear on the right side of the roller does not fall off. If it does, slide it back in place on the transfer roller before attempting to install the roller. Install the new transfer roller being careful not
to touch the rubber surface. Skin oils can affect print quality.
Reinstall everything you have removed.
|
To
check prices or purchase an HP Laserjet 5000 maintenance kit 
